Description:
It’s designed and manufactured specially for the adherence of fiber products or modules surface glued on the furnace wall. It can be separated into liquid type and powder typewe can provide the mixer or each type individual to mix when using.
Characteristics:
Heatproof
To glue the material surface by chemical adherence
No damage to the fiber after burning
Low shrinkage after drying and heating
Typical use:
The adherence of fiber products
The adherence of fiber products and wall of fireproof bricks or fireproof concrete
The adherence of fiber products and surface of furnace shell
Note:
It’s asked to be drycleanno slag of the glued surface
It needs to be mixed evenand you can add water to mix if it’s too thick
|
|
G-I |
G-Ⅱ |
|
8 |
11 |
13 |
14 |
8 |
11 |
13 |
14 |
|
Heatproof Temperature(℃) |
≥1550 |
≥1650 |
≥1680 |
≥1710 |
≥1550 |
≥1650 |
≥1680 |
≥1710 |
|
Al2O3(%) |
25-＜30 |
30-＜45 |
45-＜55 |
＞55 |
25-＜30 |
30-＜45 |
45-＜55 |
＞55 |
|
Fe2O3(%) |
≤2.0 |
≤1.0 |
≤2.0 |
≤1.0 |
|
Drying time(h) |
≤4(25℃) |
≤8(110℃) |
|
Paste extent(Pa·S) |
≥2.26 |
≥3.4 |
|
PH figure |
7-13 |
0.5-4 |
|
|
Thick and evenflat glued liquid |
|
|
|
|
|
|
|
|
|
|
|
